Hoverboards are the hottest toys of the holiday season, but they’re also the most dangerous, due to their potential to catch fire. There have been multiple reports of hoverboard fires in recent weeks, and many consumers are worried about using their hoverboards because of this risk of fire. But don’t worry; you can prevent your hoverboard from catching fire and avoid injury from a falling battery if you reset your hoverboard battery in just a few simple steps. Here’s how to reset hoverboard battery?
Keep your skateboard standing
A lot of people are scared to ride a hoverboard because they think they’ll lose control and it will start moving on its own. However, if you have proper balance, the board should stay put. To ensure this, stay standing upright when riding and keep both feet firmly planted on the ground. العاب تربح منها المال If you’re turning around or trying to switch directions, make sure that one foot is always touching the ground for balance and never rest your entire weight on just one foot. In general, avoid walking on your toes because this puts too much pressure on your ankle joint. سلوتس اون لاين
Locate the orange button
The quickest way to recharge your battery is by following these steps:
- Locate the orange button on the hoverboard. It will be located on the underside of the board, next to the power cable port.
- Push it with your finger and hold it for 5 seconds before releasing it. The battery reset should now be complete.
Press and hold the orange button for 5 seconds
You don’t have to send your hoverboard away for replacement, the easiest way is by doing this simple fix. Make sure you charge it first. Connect the charger and plug it into the wall outlet or your computer’s USB port and let it charge for at least an hour (or overnight if possible). Plug your hoverboard back into power source with the orange light on, push and hold the orange button for five seconds, then release. العب وربح If successful you will see a full battery icon with ‘POWER ON’ text indicating that your battery has been reset!
Release it when you are prompted
Drained hoverboard battery? Here’s how to easily reset it!
- Charge the hoverboard until it is fully charged.
- Turn off the power of the hoverboard, wait five seconds, and then turn it back on again.
- Press the Reset button (sometimes this is found on the remote control).
- To see if it worked, press both speed buttons for about 10 seconds each and ensure that lights blink twice per second.
- You are now good to go! Happy riding!
That’s it! Now you can ride again.
So you’ve just bought a hoverboard for your daughter and she has worn out the battery before learning how to ride. All that work of choosing the best hoverboard UK, purchasing it, spending time assembling it for her and she can’t even use it now. All is not lost, because this post will teach you how to reset your hoverboard battery in just a few steps so that your little girl can be rolling around like crazy again. She’ll thank you later!
First take off the charger from the side of the hoverboard.